Cubeecraft of the Puppet Bubba J from the Jeff Dunham Comedy Show

What are Bubba J’s favorite things to do?
“Watching Nascar and Drinking Beer”
“Look Another Left Turn!”

This exaggerated character is one of Jeff Dunham’s crazier puppets (except for Peanut, he takes the cake 😀 ) and Bubba J has captured the hearts of all the strange people of the world (I just hope they don’t relate to him hahahaha).

I happen to be one of the strange people who laugh as Bubba J talks of Beer, Nascar and his family, while every now and then moving one eye to the left and right. And because of my strange love for this character, I figured it was time he became an awesome papercraft and enter the world of cubeecraft awesomeness.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

He is a little different from a normal cubeecraft. This character wears a hat so the head block slants a little to give him a ball cap. The rim of the cap has to be attached bt inserting it into the three cuts you have to open. (they are the white lines: One above his eyes, one to the right of his eyes along the black border and one to the left of his eyes along the black border.) You also have to cut along the white line below his mouth so that it extends (the mouth should not be folded). Use the image below to help you put him together.

Remember cubeecrafts do not require glue or tape, they have interlocking tabs that connect together. Each tab has a white line that needs to be cut using an exacto knife. The tabs then slide in through that cut and remain in place.


Part 1
Part 2

You will need both parts to complete this cubeecraft

Admit it you want to print him out and pull out your Bubba J voice and scream, “I’m doin Purdy Good!”

This cubeecraft is free to download, however, I will accept donations. These projects take a long time to create and any amount is much appreciated!


Amount you wish to Donate




To Build the Cubeecraft:

Materials needed:
Printer
Card stock
scissors
x-acto knife

To make:
BODY
1. Cut out each item along the outer black lines.
2. Cut along the white on each tab using the x-acto knife
3. Cut along each red line using the x-acto knife
4. Fold along each inner solid black line and slide each tab into the slots you created with an x-acto knife to form a cube of the head, body, arms, and feet
5. Slide the arms through the red slots on either side of the body.
6. Slide the feet through the red slots at the base of the body.
7. Slide the now completed body through the red lots of the head.

The Cubeecraft is now complete. Use the image above for an example of how it should look when completed if you are having any troubles.

Cubeecraft of the Puppet Walter from the Jeff Dunham Comedy Show

Another favorite from Jeff Dunham’s Puppet Lineup. Walter, a sour apple, certainly brings humor to the show.
Get your own Walter Puppet as a Cubeecraft

Click the image above to download the template. This cubeecraft is free to download, however, I will accept donations. These projects take a long time to create and any amount is much appreciated!


Amount you wish to Donate




To Build the Cubeecraft:

Materials needed:
Printer
Card stock
scissors
x-acto knife

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

To make:
BODY
1. Cut out each item along the outer black lines.
2. Cut along the white on each tab using the x-acto knife
3. Cut along each red line using the x-acto knife
4. Fold along each inner solid black line and slide each tab into the slots you created with an x-acto knife to form a cube of the head, body, arms, and feet
5. Slide the arms through the red slots on either side of the body.
6. Slide the feet through the red slots at the base of the body.
7. Slide the now completed body through the red lots of the head.

The Cubeecraft is now complete. Use the image above for an example of how it should look when completed if you are having any troubles.

Halloween Mask of Walter From the Jeff Dunham Show

Now you can be the angry Walter from the Jeff Dunham Show.
This is a free printable mask that you can download, print out and become a puppet . 😀

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

I would quote some of his statements but honestly I like to keep my blogs clean 😀

Halloween Mask of Amon a Character from Avatar The Legend of Korra

Halloween is coming up fast. Stores are full with Decor and costumes. The motion sensor screaming ghosts are back to their old tricks (they just can’t leave me alone haha).

There are a ton of costumes out there on display. and many of them will make children very happy, but I found a shortage of anything Avatar related (The Last Airbender or Legend of Korra).

Wanting to add some Avatar Flare to Halloween and because I am an absolutely printable fanatic, I created a Halloween mask of Amon. All that is required is the hood for a down right awesome display of Amon.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Remember that this mask is printable. It will not work in the rain and its durability is paper-thin, but if you are looking for something free and easy to use than this mask may just fit your needs.

To make this mask:
1. Print this out on Cardstock
2. Cut the design out along the outer black solid line.
3. There are two white dots to the right and to the left. Punch a hole in those dots.
4. Tie a string or a length of yarn through one hole. Wrap it around the head and attach it two the second hole so that the mask is now secure on your face.
5. You are now ready to add the hood and begin your celebrations 😀

To print this, click on the image above 😀

Cubeecrafts of Pema and Rohan from Avatar Legend of Korra

It’s friday! And it couldn’t have come any sooner…No really it is mathematically impossible LOL! but that all aside guess what it brings!

Yup a new cubeecraft! And today we finally complete the Airbending family. You have seen Tenzin, Jinora, Ikki, and Meelo. However, the family is not complete without Pema. The mother of 4 and wife to Tenzin.

Pema is a nurturing wife and mother. When she can, she assists Tenzin with his indecisions. Although she loves their children she has mentioned on occasion that she would have liked them to be non-airbenders (Which I can understand, Aang was a very hyperactive kid, and so are his grand kids LOL).
We are told that she was shy in the past, but that all seems to have changed since she proclaimed her love to Tenzin. Now we find her eager to give advice and helpful to those who need it. Even Korra has looked to her for love advice.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Rohan, Tenzin’s fourth child, was born during and Equalist attack on Republic City. Before his birth, Katara tells Pema he is strong and will be another powerful airbender (much to Pema’s disappointment LOL)
He is very cute but we haven’t seen much of him in the series, hopefully that will change as new episodes get released, which is taking forever. 😀

This cubeecraft is a little different from other cubees. The center cube has been extended to resemble a dress. The legs cube has been removed from the cubee as her feet peek out from beneath her dress. This cubee also comes with Baby Rohan, which she can carry in her right arm. You will need to cut along the red lines in order to create two openings for Rohan’s tabs to fit through (see picture below). This will make it look as if Pema is carrying the baby (although I would not recommend this way of carrying a baby in real life hahaha).

If you have problems making this cubee refer to the image below.


Part 1
Part 2

To print the cubeecrafts click the links above. You will need Part 1 and Part 2 to complete Pema and Baby Rohan.

Now go forth and create the airbending family! Post pictures of them on my Facebook page! I would love to see them.

Cubeecraft of Amon from Avatar Legend of Korra

And now for the scariest villain a bender will ever face. A villain that is capable of taking away bending abilities.

Amon brought fear to the bending world of Avatar The Legend of Korra. At first many thought his ability to take away the bending of others was a gift from the Spirits (but we all know differently).

As the leader of the Equalists, Amon shows great skill in leadership and tactical attacks. He was able to use fear and anger in non-benders in order to rally them for his cause.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

I would go into this character a lot more but I do not want to ruin the final episode in season 1. Seriously if you haven’t seen it you do not know what you are missing. Very epic!

So to keep myself from giving away everything I will simply give you the cubeecraft…enjoy 😀

Click the image above to download the template. This cubeecraft is free to download, however, I will accept donations. These projects take a long time to create and any amount is much appreciated!


Amount you wish to Donate




To Build the Cubeecraft:

Materials needed:
Printer
Card stock
scissors
x-acto knife

To make:
BODY
1. Cut out each item along the outer black lines.
2. Cut along the white on each tab using the x-acto knife
3. Cut along each red line using the x-acto knife
4. Fold along each inner solid black line and slide each tab into the slots you created with an x-acto knife to form a cube of the head, body, arms, and feet
5. Slide the arms through the red slots on either side of the body.
6. Slide the feet through the red slots at the base of the body.
7. Slide the now completed body through the red lots of the head.

The Cubeecraft is now complete. Use the image above for an example of how it should look when completed if you are having any troubles.

Cubeecraft of Tenzin from Avatar Legend of Korra

Wow, I had a rush of requests for Tenzin as a cubeecraft. He is one popular guy.
This cubeecraft has facial hair which requires it to be cut along the while lines so that it will stick out as seen in the picture. It makes it a little more difficult, but you can’t have Tenzin without his beard. 😀

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Who is Tenzin?
Tenzin is an Airbending master, as shown by the iconic blue arrow tattoos that Avatar Aang also sported. He is husband to Pema and a father of four, three (that we know of) are airbenders: Jinora, Ikki and Meelo. His youngest, a newborn son, has not been shown as an airbender. His name is Rohan.

Often times we see Tenzin as calm and stern, but trust me he has a crazy side. We, of course, see more the crazy in his kids.

Without further adieu, I give you Tenzin, Avatar Korra’s Airbending master.

Click the image to download the template. This cubeecraft is free to download, however, I will accept donations. These projects take a long time to create and any amount is much appreciated!


Amount you wish to Donate




To Build the Cubeecraft:

Materials needed:
Printer
Card stock
scissors
x-acto knife

To make:
BODY
1. Cut out each item along the outer black lines.
2. Cut along the white on each tab using the x-acto knife
3. Cut along each red line using the x-acto knife
4. Fold along each inner solid black line and slide each tab into the slots you created with an x-acto knife to form a cube of the head, body, arms, and feet
5. Slide the arms through the red slots on either side of the body.
6. Slide the feet through the red slots at the base of the body.
7. Slide the now completed body through the red lots of the head.

The Cubeecraft is now complete. Use the image above for an example of how it should look when completed if you are having any troubles.

Cubeecraft of Asami Sato From Avatar The Legend of Korra

Although Asami has no bending abilities, she is still a force of nature. She is more than capable of defending herself in hand to hand combat. She also is a quick study when it comes to learning about machinery such as the electrified glove.

Because her father was the leader of Future Industries, Asami is proficient in controlling many different kinds of machinery and is an expert driver. You find examples of her ability to adapt to different machines when she controls a mecha tank.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


Asami also enters a rather awkward love triangle between Korra, Mako and herself. She starts watching Mako show a deep concern for Korra and her green monster kicks in…I wonder what will happen…

But for now Enjoy the Cubeecraft Paper Toy of Asami Sato. 😀


Part 1
Part 2

To print or download the cubeecraft just click the links above

This cubeecraft is free to download, however, I will accept donations. These projects take a long time to create and any amount is much appreciated!


Amount you wish to Donate




To Build the Cubeecraft:

Materials needed:
Printer
Card stock
scissors
x-acto knife

To make:
BODY
1. Cut out each item along the outer black lines.
2. Cut along the white on each tab using the x-acto knife
3. Cut along each red line using the x-acto knife
4. Fold along each inner solid black line and slide each tab into the slots you created with an x-acto knife to form a cube of the head, body, arms, and feet
5. Slide the arms through the red slots on either side of the body.
6. Slide the feet through the red slots at the base of the body.
7. Slide the now completed body through the red lots of the head.

The Cubeecraft is now complete. Use the image above for an example of how it should look when completed if you are having any troubles.

Cubeecraft of Lin Beifong from Avatar Legend of Korra

I had several requests for a Lin Beifong cubeecraft. In response to all those requests, She is finally here! LOL

Who is Lin Beifong?

First and foremost she is the daughter of Toph Beifong, the Earthbender from Avatar the Last Airbender and the one who invented metalbending.
Following in her mother’s footsteps, Lin is also an Earthbender with the skill of metalbending, she often uses metal cables as a weapon. Lin is the Chief of Police of Republic City and is the head of the Metalbending Police Force. She is a great leader and her forces look up to her but Lin is known as tough and uncompromising (As Korra well knows).

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Although Lin and Avatar Korra were not friends at first (to say the least) their relationship does grow with Avatar Korra and Lin assisting eachother against the Equalists and Amon.

Now without further explanation, I give you Lin Beifong. Please enjoy.

To download or print the cubeecraft click the image above.

This cubeecraft is free to download, however, I will accept donations. These projects take a long time to create and any amount is much appreciated!


Amount you wish to Donate




To Build the Cubeecraft:

Materials needed:
Printer
Card stock
scissors
x-acto knife

To make:
BODY
1. Cut out each item along the outer black lines.
2. Cut along the white on each tab using the x-acto knife
3. Cut along each red line using the x-acto knife
4. Fold along each inner solid black line and slide each tab into the slots you created with an x-acto knife to form a cube of the head, body, arms, and feet
5. Slide the arms through the red slots on either side of the body.
6. Slide the feet through the red slots at the base of the body.
7. Slide the now completed body through the red lots of the head.

The Cubeecraft is now complete. Use the image above for an example of how it should look when completed if you are having any troubles.

If you wish to request or suggest a cubeecraft character just head over to the cubeecraft page and leave a comment or send me an email through the contact me page.

Cubeecraft of Bolin From Avatar Legend of Korra

An Earth Bender and Mako’s younger brother, Bolin joins Korra and Mako as Cubeecrafts from the popular TV series Avatar The Legend of Korra, the next chapter following Avatar The Last Airbender.

Bolin lost his parents at the age of six, leaving him to look to Mako for the parental support. He helped create pro-bending team called the Fire Ferrets with his brother Mako. Korra eventual joins the team and they take second in the championships.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Bolin has a pet fire ferret named Pabu. It becomes the team mascot and preforms tricks when directed. It becomes Bolin’s best animal friend.

Team Avatar would not be complete without Bolin. Now with Mako and Korra you can for the Pro-bending Team called the Fire Ferrets.

This cubeecraft is free to download, however, I will accept donations. These projects take a long time to create and any amount is much appreciated!


Amount you wish to Donate




To Build the Cubeecraft:

Materials needed:
Printer
Card stock
scissors
x-acto knife

To make:
BODY
1. Cut out each item along the outer black lines.
2. Cut along the white on each tab using the x-acto knife
3. Cut along each red line using the x-acto knife
4. Fold along each inner solid black line and slide each tab into the slots you created with an x-acto knife to form a cube of the head, body, arms, and feet
5. Slide the arms through the red slots on either side of the body.
6. Slide the feet through the red slots at the base of the body.
7. Slide the now completed body through the red lots of the head.

The Cubeecraft is now complete. Use the image above for an example of how it should look when completed if you are having any troubles.

To download or print this cubeecraft click the image above.